Liquefied gas gas stove operation method liquefied gas gas stove installation

May 22, 2023

The liquefied gas Gas stove is a kind of stove, which mainly supplements the shortage of air during combustion by supplying natural air to the gap between the stove body and the upper cover, thereby promoting combustion and reducing the formation of carbon monoxide and nitrogen oxides. Gas is toxic and explosive. If it is improperly used, personal injury or death may occur, and safety must be paid attention to. Next, I will introduce you to the operation method of this gas stove and how to install it.

液化气煤气灶

1. Operation method of liquefied gas gas stove

Firepower should be moderate

The size of the firepower is an intuitive indicator for the average consumer to choose a gas stove. The larger the heat flow value of the domestic Gas cooker design, the stronger the heating capacity, but the fire power is not necessarily good. In fact, the size of the heat flow should be compatible with the cooking method and the cooker. If the pursuit of large heat flow, the heat efficiency of the cooker will be greatly reduced, and the waste smoke emission will be increased. So when cooking, the fire is not as big as possible. gas stoves rely on flame convection heat transfer to the bottom of the pot, but the contact time between the flame and the bottom of the pot is very short. If the fire is too large, a large amount of heat is not used for fleeting, so nearly half of the gas may be wasted.

The size of the fire should be determined according to the size of the pot. The area of the flame distribution is the best with the bottom of the pot, and the heat can be effectively transferred. When you cook soup or stew, you can first boil it with a big fire, then slowly cook it with a small fire, as long as you keep the pot rolling and not overflowing. Therefore, when using a gas stove, not only should you use moderate firepower, but you should also choose a stove according to your living habits. Usually Chinese dining habits are suitable for using stoves with more fierce firepower, but it is important to choose a single burner design that has a heat load that exceeds too much.

Select gas stove according to gas type

China's gas is mainly divided into three types: liquefied petroleum gas, artificial gas and natural gas. Each has its own type of cooker. If it is used confusingly, it will not only play its due role, but also may cause gas leakage or explosion. Therefore, before purchasing a gas stove, you should know what kind of gas is used at home. When purchasing, you should explain to the sales staff to select a gas stove that matches the gas type.

Good cookware can save gas

Many people think that saving gas is not related to cooking utensils. In fact, cooking utensils, especially commonly used woks and soup pots, serve as container carriers and heat-conducting tools for cooking soup, which play an indispensable role in improving gas utilization efficiency.

The main component of the gas used in China is carbon-oxygen. If the rice is not ventilated and oxygen-deficient during cooking, the gas will not burn normally. The carbon component in the compound will precipitate free carbon, and it will become black in the bottom of the pot. The pot black not only hinders the appearance of the cookware, but also causes pollution to the cooking environment. It also seriously affects the normal transmission of heat in the future and wastes gas in vain. Therefore, in addition to the choice of heat-conducting cookware, the bottom of the pot should be kept clean. Before cooking or boiling water, you should wipe the water stain on the bottom surface of the pot and pot before putting it on the hob. In this way, the heat can be transferred to the pot as soon as possible, thereby achieving the purpose of saving gas.

After the ignition of the good gas stove, the flame is light blue, the firepower is strong, the height of the fire is uniform, and the utilization rate of the gas is high. If an infrared gas stove is used, the gas is mixed with the air in advance and then burned, so that the combustion is carried out vigorously and fully, and the bottom of the pot will not be smothered for a long time.

Second, how to install liquefied gas stove

1. The cooker is required to be installed in a well-ventilated kitchen. The minimum distance between the cooker and the cylinder is 1 meter, but the maximum length of the intake hose should not exceed 2 meters. Do not stack flammable materials under and around the cooker.

2. The clearance between the back of the cooker and the wall is not less than 15 cm, and the clearance between the side and the wall is not less than 20 cm. If the wall is a flammable material, an insulating fireproof layer must be added. And the following part of the cooker should be no less than 10 cm, and the upper part of the cooker should be no less than 80 cm.

3. The gap at the joint of the intake pipe must be sealed. When connecting with the hose, the hose must be in place and clamped with a clamp.

液化气煤气灶

The above is the knowledge and related content of the liquefied gas gas stove provided by Xiaobian. If you want to know more about decoration consultation, please continue to pay attention to the decoration home network.

More related wonderful reading:

Liquefied gas stove can not catch fire, the working principle of liquefied gas stove

Introduction of liquefied gas stoves How does the liquefied gas stove work?

Ignition method of liquefied gas stove for liquefied gas stove

Liquefied gas stove purchase skills liquefied gas stove advantages and disadvantages

Working principle of liquefied gas water heaters Advantages and disadvantages of liquefied gas water heaters

Author:

Ms. eleven

E-mail:

puda@elecapoka.com

Phone/WhatsApp:

+86 13903037996