Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
At present, the gas stoves for household use are generally natural gas gas stoves. What is a natural gas Gas stove ? In fact, the natural gas gas stove is a kind of stove, mainly by supplying natural air to the gap between the stove body and the upper cover. The method is to supplement the shortage of air during combustion, thereby promoting combustion and reducing the formation of carbon monoxide and nitrogen oxides. Next, the decoration home decoration network Xiaobian takes you to introduce the precautions and purchase instructions of the natural gas gas stove.
First, natural gas gas stove notes
installation
1. The cooker is required to be installed in a well-ventilated kitchen. The minimum distance between the cooker and the cylinder is 1 meter, but the maximum length of the intake hose should not exceed 2 meters. Do not stack flammable materials under and around the cooker.
2. The clearance between the back of the cooker and the wall is not less than 15 cm, and the clearance between the side and the wall is not less than 20 cm. If the wall is a flammable material, an insulating fireproof layer must be added. And the following part of the cooker should be no less than 10 cm, and the upper part of the cooker should be no less than 80 cm.
3. The gap at the joint of the intake pipe must be sealed. When connecting with the hose, the hose must be in place and clamped with a clamp.
use
1. The gas transmission rubber tube is easy to aging and rupture. The interface and bending of the pipe should be checked frequently. If it is damaged, it should be replaced immediately, or replaced once every 1-2 years. It is best to use a rubber tube that is resistant to oil and pressure.
2. When using a gas stove, people should not stay away. In the event of a leak or accidental cause (wind, water, etc.), the flame should be turned off immediately, the air source main switch should be turned off immediately, the doors and windows should be opened, and the air should be ventilated quickly. Remember not to ignite or switch the electric appliance to prevent the electric spark from detonating the gas.
3. Always check the place where there is no air leakage at the joint of the gas pipe (gas tank). You can use soapy water to wipe the important parts. There are air bubbles, indicating air leakage, and should be repaired in time.
4. First ignite and then deflate, then sit on the pot: indoors should be ventilated, do not close the kitchen doors and windows for a long time.
Second, the natural gas gas stove purchase instructions
1. Should purchase the factory products, not only quality assurance, but also easy to repair.
2. Consideration should be given to selecting high-efficiency, ie energy-saving products.
3. Products that are easy to use and easy to clean should be considered.
4. It should be asked clearly whether the product has spare parts supply, whether there is a maintenance department or special maintenance point, and after-sales service measures.
5. When purchasing, you should pay attention to the following points:
A. Appearance: Qualified products are generally more beautiful and delicate, while counterfeit products are rougher, and there are even residual burrs and flash edges. Under normal circumstances, the "regular" product shell is 0.4--0.5 cm thick imported steel, and the shell of the counterfeit product is generally thin, which can be felt by eye-catching or hand-knocking. At the same time, it should be checked whether the stove surface is smooth and non-destructive, and whether the four legs are firm.
B. Inspection: Carefully check the electronic ignition system of the stove. Generally, the stainless steel electronic ignition stove is a piezoelectric ceramic electronic ignition. It should be checked whether the piezoelectric ceramic is complete, whether it is broken or not, whether the piezoelectric ceramic base is cracked, whether the wire is broken or broken, and whether the switch knob is flexible.
C. Commissioning: A good gas stove has a high hit rate, which is generally a hundred and a hundred, while the counterfeit goods are the opposite. When the test is burned, it is necessary to observe that the fire is not big, and the natural gas in the air is not heavy. Good gas stove, big fire, cut gas can fully burn, and save energy. Unqualified products generally have small fire heads and high gas consumption. Because they cannot be fully burned, the gas smell is heavier. When observing, if the fire head is light blue, it is normal, while yellow or black is abnormal.
Natural gas gas stoves are undoubtedly the most important kitchen utensils in the kitchen. Whether it is a regular meal or a small gathering of friends, it is a time when gas stoves are showing their talents. The above is the knowledge and related content of the natural gas gas stove provided by Xiaobian. If you want to know more about decoration consultation, please continue to pay attention to the decoration home network.
More related wonderful reading:
What if the gas stove can't catch fire? Basic knowledge of natural gas stove
Natural Gas cooker installation method Natural gas cooker installation precautions
Which is better for natural gas cookers? Which is better to buy a gas cooker?
How to change the liquefied gas stove to change the natural gas?
What is the reason for the gas stove tempering? What should I do if the gas stove is tempered?
March 16, 2022
March 18, 2020
September 27, 2024
September 27, 2024
1. The applicable range of waterproof tape is suitable for high quality roll-type marine sealing tapes under normal weather conditions. 2. Roofing waterproofing, underground waterproofing,...
There are three types of range hoods in the market: thin, deep and cabinet. When purchasing, you should first determine the type of purchase based on your kitchen's specific pattern and personal...
The buried lights are square and round in shape, and are widely used in shopping malls, parking lots, green belts, park brigades, tourist attractions, residential quarters, urban sculptures,...
Huake refractory XZ-L690 is used for making cement, porcelain, paint filler, mordant, metal aluminum and so on. It can be added to various water-based resins, oil-based resins, epoxy resins, acrylic...
Email to this supplier
March 16, 2022
March 18, 2020
September 27, 2024
September 27, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.