Range hood side suction or direct suction good range hood selection

Range hoods play an important role as kitchen health protectors and are an integral part of kitchen decor. Range hoods have such an important position in family life, so we must not be sloppy when choosing a Range Hood. So what kind of household smoking machine is good, is the side hood sucking well or the top sucking? Let us know if the suction hood side suction is good or the direct suction and the range hood purchase guide.

Commercial Induction Cooker, commercial induction cooker, Induction cooker, induction cooker

Range hood side suction or direct suction

1, smoke exhaustion effect:

1. Top suction type hood: The top smoking machine is prone to the separation of soot. It has been said that the soot has begun to spread when it rises to 40CM, and the installation height of the traditional top smoking machine is greater than 40CM. If the hood is installed too Low, will suck the flames up. Therefore, some of the soot has spread to the surrounding area. If it is often cooked at home, the top suction is not suitable~~~

2, side suction range hood: side smoking machine with side air intake, low installation, smoke exhaust effect is much better than top smoking. In particular, the side smoking machine with the soot separating plate can not only suck the soot, but also suck the harmful gas in the gas together, and the exhausting efficiency is higher.

Comments: So, the side smoking machine is more efficient than the top smoking machine.

2, soot separation:

1. Top suction type range hood: In order to be able to isolate the soot, the top smoking machine uses a filter to separate, but after years of use, the effect is not very good, there will still be some soot passing, causing the internal accumulation of the machine. A lot of oil pollution, which is why many friends have bought a top smoking machine for a while, and the smoke exhaustion effect will drop.

2. Side suction type range hood: The side smoking machine is equipped with a soot separation board to physically separate the soot. The treated soot is flowed into the oil tank, and the discharged breeze reaches 90% of the soot separation and purification effect. In this way, it is not easy to accumulate oil inside the machine, which not only ensures the smoke exhausting effect, but also enables the fan to be effectively protected, thereby extending the life of the hood.

Comments: It is true that the side smoker's soot separation effect is better than the top suction.

3, mute effect:

1. Top suction type hood: The top smoking machine is a product that has been used for many years. Relatively speaking, it is already a relatively mature product. Through the continuous improvement of the manufacturer, and using the mute technology, basically achieve low noise ~~

2, side suction range hood: side smoking machine is a product that has only emerged in recent years, its fume separation board with fume exhaust efficiency and suction are better than the top smoking machine, but consumers generally reflect the noise of the side smoking machine Larger, I also believe that in the next few years, manufacturers will gradually improve this shortcoming.

Comments: Although the side suction is more noisy than the top smoking machine, but the side suction also has many advantages, you can choose according to your own situation, not perfect, only suitable.

4, easy to clean:

1. Top suction type range hood: Since the traditional top suction range hood has no purification function, it is difficult to separate the soot. Therefore, after using for a period of time, it will be found that there is a large amount of oil in the machine, which is quite difficult to clean.

2. Side suction type range hood: Due to the structural problems of the side smoking machine, it is difficult to realize integral forming of the collecting chamber, and it is also difficult to clean. In addition, the side smoking machine also absorbs a lot of soot, and the accumulated oil is relatively more.

Range hood purchase guide

1, motor quality

The most important part of the range hood is the motor that drives the wind wheel. At present, the quality of the domestically produced motor can fully meet the design requirements of the range hood. When purchasing, do not blindly believe in imported motors, resulting in higher purchase costs. The bearing is an important part of the motor. When choosing, pay attention to the motor with double ball bearing. It has a long life and low noise. In addition, the choice of all-metal spray wind wheel is durable and stable, which is conducive to the separation of soot. When purchasing, press the motor start switch repeatedly to compare the running sound after the motor is turned on and off. The smaller the noise, the better.

2, motor power

Suction is an important function indicator of the range hood. The size of the suction directly affects the smoking effect of the range hood. The amount of suction depends on the power of the motor. The higher the motor power, the greater the suction. Is it the right choice of the most powerful range hood on the market? Actually, it should be based on the population of your family. If there are not many members in the family, the taste is light, and you don't like to cook and stir-fry when cooking, it will not produce a lot of fumes, and the motor power is not too small.

If you are unfamiliar with the technical specifications of the motor power, you can judge it by your personal intuitive feeling when you purchase it. Sometimes, the shopping mall's shopping guide will give you some demonstrations, such as putting a paper on the underside of the range hood, turning on the motor, the paper will quickly be tightly attached to the suction vent, in fact, almost all range hoods can To achieve this effect, it is not easy to separate the size of the suction.

The easiest way is to test by hand. First, open the range hood, put your hand near the suction port, and feel the wind is down. Put your hand on the air outlet and feel the wind. The handle is placed at the seam of the box. At the screw mouth, check if there is any air leakage. The negative pressure generated by the range hood that does not wind down, does not leak, and has a large wind is high and uniform, and the smoke exhausting effect is relatively good. Note that the smoke hoods that can suck the washbasin and paper are not necessarily the best, and the best effect of smoking and exhausting is the balanced smoke exhaust type.

3, the number of wind wheels

Most of the range hoods on the market currently have a wind wheel installed, but a few have two wind wheels installed. Is it better to have two wind wheels than one wind wheel? In fact, whether it is two wind wheels or one wind wheel, the exhausted oil smokes all go to the same flue. If the left and right wind wheels are running at the same time, it is difficult to keep the winds completely consistent, so that the unbalanced airflow discharged by the two wind wheels will collide, which will increase the burden and loss of the motor, especially after using for a period of time, the exhaust effect may be large. discount. Therefore, it is recommended to purchase carefully.

4, functional configuration and cleaning

The range hood is smoked and burned all day long, and is easily contaminated by oily dirt, which not only affects hygiene and beauty, but also affects the normal operation and service life of the range hood. Therefore, it is very important that the range hood is easy to clean or clean itself.

At present, the range hood on the market has some self-cleaning functions, such as: the surface of the wind wheel is coated with oil-free coating; the box body adopts seamless design and double oil circuit design, and the inclined oil spill opening slot is added to accumulate the inner wall of the tank. The oil stains flow into the oil cup along the chute to prevent dripping; the box body is easy to disassemble and easy to clean; some range hoods have an automatic cleaning device, and the user first adds the cleaning liquid to the machine. Inside the pot, just press the switch, it can automatically flush the oil accumulated in the wind wheel and the inner wall of the box, and flow into the oil cup along the chute to ensure the normal operation and service life of the machine. The above self-cleaning function is more reasonable and effective, and the user should have some understanding when selecting the range hood.

5, other details that cannot be ignored

With a mechanical switch, it is very durable. Try not to choose electronic touch technology. Although it is beautiful in appearance, it is easily contaminated, has a short life span and is easily damaged.

The length of the exhaust pipe should not be longer than two meters. It is best to use the whole section to stretch the wind to prevent oil leakage.

The fully enclosed snail liner, which is formed by high-quality cold-rolled sheet and sprayed, is airtight, oil-free, and durable and rust-free;

At present, the decorative panels of the range hoods on the market are colorful, all metal, glass, crystal, ceramics, etc., should be determined according to the specific decoration pattern of the kitchen and personal aesthetics and preferences.

The above is a small series of hood side suction or direct suction and the introduction of the range hood purchase guide, I hope to help you.